Handheld Dual Channel Oscilloscope with True RMS Digital Multimeter - TPI® 460
Our Item Number: 148387
Manufacturer: Extech Instruments
Manufacturer Item #: MS400
|
This Handheld Dual Channel Oscilloscope features pre and post triggering!
Features & Applications:
This Handheld Dual Channel Oscilloscope includes a True RMS Digital Multimeter. It has a 3” x 3” cold cathode fluorescent display providing test data in a clear easy to see format. The cursor readout function allows the width and amplitude of a signal to be measured precisely instead of trying to figure it out manually.
Features:
- 20 MHz Bandwidth
- Cursor Readout
- Decibels
- Pre and Post Triggering
- Trend Mode
- Dual Input
- True RMS DMM
- Real Time Sample Rate
- Bright LCD Backlight
- Continuous Autoset
- Includes:
- Two test leads
- Two banana to BNC adapters
- One DC-60 MHz X1 X10 passive oscilloscope probe
- Power supply
- Instruction manual
Applications:
- Power Quality
- Variable Speed Drives
- Industrial Motor Controls
- Battery Testing
- Programmable Logic Controls
- NC/CNC Machines
- Uninterruptible Power Supplies
- Audio
- Video
- Industrial Lighting Controls
- Factory Automation
- Line Conditioners
- Voltage Regulators
- Inverters
- Gaming Industry
Spec Summary:
| Display: |
| Size: |
3” x 3” (76mm x 76mm) |
| Pixels: |
240 x 240 |
| Backlight: |
Yes |
| Power: |
| External: |
5V DC power supply (Included) |
| Internal: |
4.8V DC rechargeable battery |
| Operating Time: |
2.5 Hours with backlight on |
| Charging Time: |
10 hours |
| Memory: |
| Waveform: |
Save 2 full screens |
| Setup: |
Saves user settings |
| Vertical: |
| Sample Rate (-3dB): |
Real Time: 25 Megasamples per Second up to 2 MHz
Equivalent Time: 500 Megasamples per Second > 2 MHz |
| Bandwidth: |
20 MHz w/SP60B 10:1 Probe
10 MHz w/Shielded Test Leads |
| Resolution: |
8 bits |
| Channels: |
2 |
| Coupling: |
AC, DC, GND (max: 750V) |
| Input Impedance: |
Approximately 1M Ohm |
| Sensitivity: |
50mV TO 200V/div 1,2,5 Sequence |
| Accuracy: |
± 3% ± (3% + 0.05 range/div) |
| Trigger Position: |
Ver1;Fixed Position / Ver3; Adjustable Position |
| Trigger Mode: |
Free Run, Normal |
| Trigger Source: |
Internal |
| Trigger Slope: |
Positive / Negative |
| Trigger Sensitivity: |
Equivalent Time: 3 divisions or more
Real Time: 2 divisions or more |
| Horizontal: |
| Sample per Division: |
25 |
| Time / Division: |
50nS to 500nS / DIV |
| Modes: |
Single, Normal, Auto |
| Accuracy: |
Equivalent Time : ± (0.5% + 0.08 time/div)
Real Time: ± (0.1% + 0.04 time/div) |
| Trend Mode: |
| Plot Time: |
30 sec/div to 1 hour/div |
| Plot Data Type: |
Max/Min Selectable |
| Memory: |
2 Screens |
| True RMS DMM: |
| DCV (CH1, CH2): |
400mV, 4, 40, 400, 600V |
| Basic DC Accuracy: |
± (0.5% + 5 digits) |
| ACV (CH1, CH2): |
400mV, 4, 40, 400, 600V |
| Basic ACV Accuracy: |
± 0.75% ± (1% + 10 digits) |
| Frequency (CH1, CH2): |
1 Hz to 20 MHz |
| Basic Frequency Accuracy: |
± (0.5% + 5 digits) |
| Ohm (CH1 only): |
400, 4k, 40k, 400k, 4M, 20M |
| Basic Ohm Accuracy: |
± (0.5% + 5 digits) |
| Continuity (CH1 only): |
< 0.1k ohm, ± (2% + 5 digits) |
| Diode Test: |
5mA maximum output |
|
